Polymer Brick Ties

What if, for once, cheaper actually meant better

Would the 30% cost saving alone sway you from conventional stainless steel ties? Here are 6 more reasons why you should start using Ni-Ties:

Ni-Ties will not corrode in areas near the sea or industrial zones because they are chemically resistant, unlike galvanised ties that corrode and become ineffective.
Ni-Ties have rounded edges and are light-weight. This makes handling much safer and quicker. Less accidents - no cuts from sharp edges.
Ni-Ties comply with existing fire ratings for low and medium density housing.
Ni-Ties high strength and stiffness make them ideal for areas subject to intense natural conditions such as high wind, earthquakes and cyclones.
Ni-Ties eliminate the problem of electrolysis in steelframed houses when using dissimilar metals.
Ni-Ties have acoustic properties greater than metal ties and the Ni Tie Acoustic Cavity Tie provides even further reduction of noise and vibration transference.
This simple, inexpensive product has been standing the test of time for quality builders around Australia since 1996. Now you can benefit from its improved strength, durability, safer handling and of course the enormous cost savings against conventional stainless steel ties.
Use Ni-Ties on your next building project and experience them for yourself.

Heavy Duty Cavity
100mm Cavity Tie in Heavy Duty (red) to cater for the larger cavities. More than twice the strength and stiffness required by AS/NZ 2699-2000.
Medium Duty Cavity
Medium Duty Cavity 50mm Cavity Ties in Medium duty (white) to satisfy AS/NZ 2699-2000. Rounded ends to prevent injury and central hole to assist bond in mortar.
Medium Duty Veneer
50mm side fixed Veneer Ties in Medium duty (white) to satisfy AS/NZ 2699-2000. Use 2 fixings to prevent rotation whilst in service. Colour coded to assist in identifying classification in the wall. Ideal for steel and timber stud, brick veneer homes and buildings.
Medium Duty Stubbie
50mm face fixed Stubbie Ties in medium duty (white) to satisfy AS/NZ 2699-2000. Ideal for plywood braced and insulated walls. Every tie is chemically inert.
Medium Duty Acoustic Cavity
50-70mm Acoustic Cavity tie is the standard medium duty Ni-Tie with each end over moulded with a resilient material. The resilience substantially reduces air and structure borne noises. Also reduces impact and vibration in masonry walls. Patent Applied.